🔌 Aftermarket Replacement 🛡️ Safety Focused 📏 150" Extra-Long
89143 150" Power Cord for Robot Coupe MP Series
Restore full power with a durable PVC jacket, pure copper conductors, and built-in protection (over‑voltage / over‑current / short‑circuit). Designed for busy home and commercial kitchens.
🧵 Durable PVC jacket
🧲 High‑purity copper
🚫 OVP / OCP / SCP
↔️ 150" flexible reach
Key Benefits
- Premium Build: Thick PVC jacket resists abrasion and bending while high‑conductivity copper core delivers stable power.
- Safer Operation: Integrated protection against over‑voltage, over‑current and short circuits for peace of mind.
- Longer Reach: 150 inches (12.5 ft / ~3.8 m) lets you position equipment where you need it—no awkward extensions.
- Consistent Performance: Replace tired, cracked or intermittent cords to restore full output on MP series blenders.
Compatibility
- Robot Coupe MP350
- Robot Coupe MP450
- Robot Coupe MP550
- Robot Coupe MP600
- Robot Coupe MP800 Turbo
Part Number89143
Cable Length150" (12.5 ft / ~3.8 m)
Outer JacketPVC
ConductorCopper
* Please verify your unit label and connector routing before purchase. Message us with photos if you need confirmation.
Size & Dimensions
- Overall length: 150" (12.5 ft / ~3.8 m)
- Jacket: PVC | Core: Copper
- Connector details: match to your original before install
Compare Before / After
Old cord: risk of power drop / safety concerns
New cord: stable output, longer reach
- Performance: stable power delivery after replacement
- Reach: 150" vs typical shorter stock cords
- Protection: OVP / OCP / SCP (integrated)
Trademarks belong to their owners. This is a high‑quality aftermarket replacement part, not OEM.
What's in the Box & Install
- Included: Power Cord 89143 × 1 (replacement)
- Basic steps: ① Disconnect from mains → ② Open rear cover / strain clamp → ③ Swap and secure new cord → ④ Verify ground & leakage test.
- Pro tip: Because this is an electrical part, use a qualified technician. Inspect jacket and clamp periodically to prevent pinch damage.
FAQ
Is this OEM?
This is a premium aftermarket replacement (not OEM). If you require OEM, contact an authorized brand channel.
Is it suitable for commercial kitchens?
Yes—materials and protections are optimized for frequent use. Keep dry/clean and away from heat sources; perform routine checks.
Can I wash the cord under running water?
No. The cord resists common stains, but do not submerge or pressure‑wash. Unplug, wipe with a slightly damp cloth, then dry fully.
Suggested Keywords (SEO)
Robot Coupe MP power cord 89143, immersion blender cord replacement, MP350 MP450 MP550 MP600 MP800 Turbo cable, 150 inch power cord, commercial kitchen spare parts
🔌 Aftermarket Replacement 🛡️ Safety Focused 📏 150" Extra-Long
89143 150" Power Cord for Robot Coupe MP Series
Restore full power with a durable PVC jacket, pure copper conductors, and built-in protection (over‑voltage / over‑current / short‑circuit). Designed for busy home and commercial kitchens.
🧵 Durable PVC jacket
🧲 High‑purity copper
🚫 OVP / OCP / SCP
↔️ 150" flexible reach
Key Benefits
- Premium Build: Thick PVC jacket resists abrasion and bending while high‑conductivity copper core delivers stable power.
- Safer Operation: Integrated protection against over‑voltage, over‑current and short circuits for peace of mind.
- Longer Reach: 150 inches (12.5 ft / ~3.8 m) lets you position equipment where you need it—no awkward extensions.
- Consistent Performance: Replace tired, cracked or intermittent cords to restore full output on MP series blenders.
Compatibility
- Robot Coupe MP350
- Robot Coupe MP450
- Robot Coupe MP550
- Robot Coupe MP600
- Robot Coupe MP800 Turbo
Part Number89143
Cable Length150" (12.5 ft / ~3.8 m)
Outer JacketPVC
ConductorCopper
* Please verify your unit label and connector routing before purchase. Message us with photos if you need confirmation.
Size & Dimensions
- Overall length: 150" (12.5 ft / ~3.8 m)
- Jacket: PVC | Core: Copper
- Connector details: match to your original before install
Compare Before / After
Old cord: risk of power drop / safety concerns
New cord: stable output, longer reach
- Performance: stable power delivery after replacement
- Reach: 150" vs typical shorter stock cords
- Protection: OVP / OCP / SCP (integrated)
Trademarks belong to their owners. This is a high‑quality aftermarket replacement part, not OEM.
What's in the Box & Install
- Included: Power Cord 89143 × 1 (replacement)
- Basic steps: ① Disconnect from mains → ② Open rear cover / strain clamp → ③ Swap and secure new cord → ④ Verify ground & leakage test.
- Pro tip: Because this is an electrical part, use a qualified technician. Inspect jacket and clamp periodically to prevent pinch damage.
FAQ
Is this OEM?
This is a premium aftermarket replacement (not OEM). If you require OEM, contact an authorized brand channel.
Is it suitable for commercial kitchens?
Yes—materials and protections are optimized for frequent use. Keep dry/clean and away from heat sources; perform routine checks.
Can I wash the cord under running water?
No. The cord resists common stains, but do not submerge or pressure‑wash. Unplug, wipe with a slightly damp cloth, then dry fully.
Suggested Keywords (SEO)
Robot Coupe MP power cord 89143, immersion blender cord replacement, MP350 MP450 MP550 MP600 MP800 Turbo cable, 150 inch power cord, commercial kitchen spare parts
The Brand
