30/60A Embedded Snap-On Energy Storage Dedicated MPPT Solar Controller WIFI Bluetooth APP Intelligent Solar Control
Safety Instructions: 1. This controller is 12V/24V automatic adaptation or manually set the appropriate battery charging mode. When installing for the first time, please make sure that the battery has enough voltage to start and automatically set the controller parameters. 2. The battery cable should be as short as possible to minimize loss. 3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel and other batteries). If you charge a lithium battery, you must be familiar with its battery characteristics, and you must set the charging parameters before you can use it. For example: charge 12V lithium battery, as of output protection setting 9.5V, full protection 12.5V, start charging voltage 11.5V when the battery drops. 4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. 5. The battery protection board must be provided when charging the lithium battery, and the products of the lithium battery manufacturer with certification and meeting the national requirements must be selected. It is strictly forbidden to charge directly without a protective plate, and it is strictly forbidden to recharge the lithium battery pack without permission.
Features: 1. Industrial-grade master control chip with AD sampling precision, temperature level 16 charging current, discharge current, and cumulative output real-time display for clear at-a-glance monitoring. 2. Automatic focusing MPPT tracking charging with high charging efficiency and non-stop detection during charging with bidirectional focusing tracking. 3. Large-screen LCD display with adjustable charging and discharging parameters. Ultra-wide charge and discharge adjustable range allows you to set corresponding charging parameters for any battery type. When the output is off, the time can be adjusted for greater convenience. 4. Complete three-phase charge management to effectively protect the battery and extend its lifespan. 5. Built-in overheating, overcurrent, short circuit, open circuit, and reverse connection protection. When the fault is eliminated, the controller automatically recovers without damaging the device. 6. Bidirectional MOS tube anti-backflow circuit with high-power charging mode and ultra-low heat generation.
Specifications: Type: MPPT Controller Color: Blue System Voltage: 12V/24V Rated Charge Current: 30A/60A Rated Discharge Current: 15A/25A Self-Consume: <10mA USB Output: 5V/2A MAX Operating Temperature: -10-+60℃ Size/Weight: 133×70×35mm/150g Package Included: 1x MPPT Solar Controller 1x User Manual
Shipping Information: Free quick shipping to USA. Estimated time of arrival: within 3-8 working days. Warranty: Customers have the right to request a return within 60 days from the date of product receipt. At Itopteng, we offer prompt customer service to assist with product usage inquiries and facilitate returns or refunds.
30/60A Embedded Snap-On Energy Storage Dedicated MPPT Solar Controller WIFI Bluetooth APP Intelligent Solar Control
Safety Instructions: 1. This controller is 12V/24V automatic adaptation or manually set the appropriate battery charging mode. When installing for the first time, please make sure that the battery has enough voltage to start and automatically set the controller parameters. 2. The battery cable should be as short as possible to minimize loss. 3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel and other batteries). If you charge a lithium battery, you must be familiar with its battery characteristics, and you must set the charging parameters before you can use it. For example: charge 12V lithium battery, as of output protection setting 9.5V, full protection 12.5V, start charging voltage 11.5V when the battery drops. 4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. 5. The battery protection board must be provided when charging the lithium battery, and the products of the lithium battery manufacturer with certification and meeting the national requirements must be selected. It is strictly forbidden to charge directly without a protective plate, and it is strictly forbidden to recharge the lithium battery pack without permission.
Features: 1. Industrial-grade master control chip with AD sampling precision, temperature level 16 charging current, discharge current, and cumulative output real-time display for clear at-a-glance monitoring. 2. Automatic focusing MPPT tracking charging with high charging efficiency and non-stop detection during charging with bidirectional focusing tracking. 3. Large-screen LCD display with adjustable charging and discharging parameters. Ultra-wide charge and discharge adjustable range allows you to set corresponding charging parameters for any battery type. When the output is off, the time can be adjusted for greater convenience. 4. Complete three-phase charge management to effectively protect the battery and extend its lifespan. 5. Built-in overheating, overcurrent, short circuit, open circuit, and reverse connection protection. When the fault is eliminated, the controller automatically recovers without damaging the device. 6. Bidirectional MOS tube anti-backflow circuit with high-power charging mode and ultra-low heat generation.
Specifications: Type: MPPT Controller Color: Blue System Voltage: 12V/24V Rated Charge Current: 30A/60A Rated Discharge Current: 15A/25A Self-Consume: <10mA USB Output: 5V/2A MAX Operating Temperature: -10-+60℃ Size/Weight: 133×70×35mm/150g Package Included: 1x MPPT Solar Controller 1x User Manual
Shipping Information: Free quick shipping to USA. Estimated time of arrival: within 3-8 working days. Warranty: Customers have the right to request a return within 60 days from the date of product receipt. At Itopteng, we offer prompt customer service to assist with product usage inquiries and facilitate returns or refunds.
