⭐usdx+ HF Shortwave Transceiver QRP SSB/CW Transceiver 3W-5W All Mode 8 Band Upgraded Version of usdx
Note:
This product has no built-in battery and no power source. It needs to be equipped by the user. Make sure you don't mind before buying! ! !
The power interface is 5.5mm, the power supply voltage is 12.6V, 1A 2A can be used.
The battery specification is 11.1V/12.6V 4000mAh lithium battery.
You can buy a power supply or battery according to the above values, thank you.
Description:
This is a shortwave QRP SSB/CW transceiver. The ultra-small size is easy to carry for outdoor use, using 1602N LCD screen, built-in speaker, support to connect to PC, use digital mode software control such as FT8, JS8, FT4, etc., support CW automatic decoding.
Features:
✅8 tracks cover 80m/60m/40m/30m/20m/17m/15m/10m
✅Excellent PCB layout design in line with high frequency circuit design principles to ensure excellent performance
✅Whether using internal battery or external 13.8v power supply, it can achieve 3-5w power in 8 ranges, and reserve SOT-223 and TO-220 pack pads needed to upgrade
✅High emission efficiency, 80m/60m/40m/30m/20m efficiency is greater than 80%, 17m efficiency is greater than 70%, 15m/10m efficiency is greater than 60%
✅High accuracy KDS brand TCXO, frequency accuracy is better than 1ppm, frequency stability is better than 0.5ppm
✅Ultra small size: 83*38*124mm (excluding protruding parts)
✅Abundant interfaces (cat, ptt out, mic/key, k-head mic)
✅All LPF parts use 100v c0g/np0 capacitors
✅Use genuine Omron original magnetic latching relays
✅Use op amp chip with lower noise than LM4562
✅Built-in speaker with cavity
✅BNC antenna interface
List of Functions:
1. Support all modes: usb, lsb, cw, am, fm (ssb mode has good reception effect, but poor transmission effect. AM and FM modes are free, and the effect is not good)
Filter dsp filter: 4000, 2500, 1700, 500, 200, 100, 50hz passband
2. Function DSP functions: automatic gain control (AGC), noise reduction (NR), Xmit voice trigger (VOX), RX attenuator (ATT), TX noise gate, tx unit control, volume control, dbm/s meter.
3. Sidebar/Carrier Suppression SSSSB transmit: better than -45dbc, imd3 (dual tone) -33dbc, receive: better than -50dbc
4. Support multi-band support, continuously adjustable 10m within 80m frequency range (from 20khz..99mhz, loss performance)
5. Open source firmware, built with arduino ide; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines of software-based Vovox code available for fast full control (qsk and half-qsk operations) or rx/ Auxiliary switch tx for external control of ptt/pa output using fully digital tx-delay stage and software based ssb stage transmitter in digital mode (no cat or ptt interface required): controls the phase of the sill si5351 (by switching at 800kbits/s Small frequency changes under i2c) and magnitude of pa (via pwm pa key shaping circuit)
6. Software-based all-digital SDR receiver stage (optional): The I/Q (complex) signal is sampled from a quadrature sampling detector digital mixer and a 90 degree phase shift is performed mathematically in software ( Hilbert transform) and three independently switchable analog faders (0db,-13db,-20db,-33db,-53db,-60db,-73db) from the pre-receiver by adding Atten sidebands
7. Receiver noise floor mds: -135dbm at 28mhz (200hz bw)
8. Receiver receiver front-end selectivity: +/-2khz steep 45db/decade tuning frequency rolling
9. Blocking blocking dynamic range: 20khz offset 123db, 2khz offset 78db
10.cw decoder, direct/iambic-a/b keyer
11.vvfo a/b + rit and split, and the corresponding relay through i2c
12.cat supports cat with filter switch (using kenwood TS-480 protocol)
Specifications:
-Type: hf qrp sdr transceiver
-Mode: ssb/cw
- Frequency range: 3.5-30mhz
-Built-in mic
-Antenna/connector: 50ohms/so-239
Package Includes:
-1 x usdx+ Transceiver
-1 x Microphone
-4 x Machine Foot Pads
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
⭐usdx+ HF Shortwave Transceiver QRP SSB/CW Transceiver 3W-5W All Mode 8 Band Upgraded Version of usdx
Note:
This product has no built-in battery and no power source. It needs to be equipped by the user. Make sure you don't mind before buying! ! !
The power interface is 5.5mm, the power supply voltage is 12.6V, 1A 2A can be used.
The battery specification is 11.1V/12.6V 4000mAh lithium battery.
You can buy a power supply or battery according to the above values, thank you.
Description:
This is a shortwave QRP SSB/CW transceiver. The ultra-small size is easy to carry for outdoor use, using 1602N LCD screen, built-in speaker, support to connect to PC, use digital mode software control such as FT8, JS8, FT4, etc., support CW automatic decoding.
Features:
✅8 tracks cover 80m/60m/40m/30m/20m/17m/15m/10m
✅Excellent PCB layout design in line with high frequency circuit design principles to ensure excellent performance
✅Whether using internal battery or external 13.8v power supply, it can achieve 3-5w power in 8 ranges, and reserve SOT-223 and TO-220 pack pads needed to upgrade
✅High emission efficiency, 80m/60m/40m/30m/20m efficiency is greater than 80%, 17m efficiency is greater than 70%, 15m/10m efficiency is greater than 60%
✅High accuracy KDS brand TCXO, frequency accuracy is better than 1ppm, frequency stability is better than 0.5ppm
✅Ultra small size: 83*38*124mm (excluding protruding parts)
✅Abundant interfaces (cat, ptt out, mic/key, k-head mic)
✅All LPF parts use 100v c0g/np0 capacitors
✅Use genuine Omron original magnetic latching relays
✅Use op amp chip with lower noise than LM4562
✅Built-in speaker with cavity
✅BNC antenna interface
List of Functions:
1. Support all modes: usb, lsb, cw, am, fm (ssb mode has good reception effect, but poor transmission effect. AM and FM modes are free, and the effect is not good)
Filter dsp filter: 4000, 2500, 1700, 500, 200, 100, 50hz passband
2. Function DSP functions: automatic gain control (AGC), noise reduction (NR), Xmit voice trigger (VOX), RX attenuator (ATT), TX noise gate, tx unit control, volume control, dbm/s meter.
3. Sidebar/Carrier Suppression SSSSB transmit: better than -45dbc, imd3 (dual tone) -33dbc, receive: better than -50dbc
4. Support multi-band support, continuously adjustable 10m within 80m frequency range (from 20khz..99mhz, loss performance)
5. Open source firmware, built with arduino ide; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines of software-based Vovox code available for fast full control (qsk and half-qsk operations) or rx/ Auxiliary switch tx for external control of ptt/pa output using fully digital tx-delay stage and software based ssb stage transmitter in digital mode (no cat or ptt interface required): controls the phase of the sill si5351 (by switching at 800kbits/s Small frequency changes under i2c) and magnitude of pa (via pwm pa key shaping circuit)
6. Software-based all-digital SDR receiver stage (optional): The I/Q (complex) signal is sampled from a quadrature sampling detector digital mixer and a 90 degree phase shift is performed mathematically in software ( Hilbert transform) and three independently switchable analog faders (0db,-13db,-20db,-33db,-53db,-60db,-73db) from the pre-receiver by adding Atten sidebands
7. Receiver noise floor mds: -135dbm at 28mhz (200hz bw)
8. Receiver receiver front-end selectivity: +/-2khz steep 45db/decade tuning frequency rolling
9. Blocking blocking dynamic range: 20khz offset 123db, 2khz offset 78db
10.cw decoder, direct/iambic-a/b keyer
11.vvfo a/b + rit and split, and the corresponding relay through i2c
12.cat supports cat with filter switch (using kenwood TS-480 protocol)
Specifications:
-Type: hf qrp sdr transceiver
-Mode: ssb/cw
- Frequency range: 3.5-30mhz
-Built-in mic
-Antenna/connector: 50ohms/so-239
Package Includes:
-1 x usdx+ Transceiver
-1 x Microphone
-4 x Machine Foot Pads
Shipping:
Free Shipping
Handling time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
Some of the reviews shown are from related products the merchant grouped with this one.
A
Charges fast, works great, and the magnet is strong. The lifetime warranty is a huge bonus! If you’re looking for a reliable, high-quality charger with unbeatable warranty protection, this is the one to get! Highly recommend.
A
As advertised. Looks so classic and exactly as the good old days of transistor radios...the real transistor 😎 Size is big enough...see pictures. Sound is deep and full of base. Good reception of radio bands. Has Bluetooth and USB too but didn't try them yet. It captured our hearts my wife and I. Really recommend. Arrived before delivery date in a well packed package.
A
We love this radio and have it in our kitchen and it brings back nice memories. It’s simple to operate with dial tuning and the FM stations come in clear. The sound is also good and the look and quality is nice. Bluetooth device hook up is a breeze. We are very glad we purchased this radio.
A
Great portable antenna, especially when there isn't something to support a long wire. I've had this for a few months and wound up using this as my Field Day antenna (you can see it off to the right, behind my shelter in the photo below) and I got good results. It's quick and easy to set up, and very portable with it's nicely organized case. I've used this for POTA activations, and POTA hunting with great results.
A
This antenna works great, and great for the price, I'm pretty sure its the same antenna that HRO and DX engineering sell as "their" brand. The 20M and 40M tuning marks on the coil will get you pretty close to where you need to be with good SWR, you can also take the coil off and adjust the whip to work 17m, 15m 12m and 10m. I took the ground radio ribbon cable and split it into 5 sections of 2 strands and spread it out into a star strutcure I used this QRP CW at a state park in New York for about 2 hours and made 25 contacts several to the west coast and 2 DX contacts!
A
I tested this power converter and I must say it exceeded my expectations. It's compact, easy to carry, and very simple to use. It converts power efficiently, allowing me to connect multiple devices without worrying about overloads or fluctuations. Its construction also seems sturdy and durable, ideal for travel or everyday use at home. I especially recommend it to those who need a reliable and safe adapter for different types of electronic devices.
A
Tried it to acquire NOA Satellite pass instead of using a V dipole just to see results. Image has some interference even with FM filter. Shortwave, FM, Aviation comes in nicely. Used WxtoImg and SDRSharp. I suppose it depends on pass and location.
A
I needed a simple antenna to get me through the winter and although it is a "receive only" antenna, I knew that before I ordered it. It arrived in perfect condition and was neatly packaged. I assembled it a few days after Christmas and put it up in the backyard. It works as advertised and I am very pleased with it. I also cut the top off a 2 Liter soda pop bottle and then inverted it over the electronics box to act as a rain guard. We had a big rain storm last night and it is totally dry.
A
I absolutely love this little rig. While it wasn't my first venture into the realm of compact Chinese transceivers, it has quickly become my favorite. My previous experience with the Radioddity QR20 was a disappointment on every level, but this rig excels in multiple areas. It's loud, powerful enough for its size, well-built, versatile, and boasts a large user community, making it easy to find answers regarding usage or repairs.
A
Bought it because of the water/dust proof rating, mounted in my rzr so that is a must.
Only time will tell if it last, but I like it so far.
Paired it with a tram antenna mounted on the roof and we are good to go.
If you are looking at buying this radio and only need 25 watts it is well worth the money.
A
Purchased two of these for installation in my vehicles; manually programmed both with identical frequencies, about 40 or so. These are simple to program, also EZ to 'expand' the bandwidth to accommodate greater frequency ranges. The radio itself is small, rugged and very solid feeling. The waterproofing is evident, although I'm not about to test it. The microphone is noticeably more substantial feeling than many radios of similar purpose; overall it's a great choice at a nice price point.
A
This is a good little radio, I had it in my car, but moved it in for a base station, with a home made 1/4 wave 2m antenna I can open repeaters 60 miles away . This unit has been a great little radio, I use it for a base, and talk on it daily, 25w all day long, the fan it still working like it should, I'm a TYT guy now, the quality is impeccable.
A
Quality is good, mount brackets and base mount also good paint job, is a good product. Recommend to others.
D
Wow! I was nervous because of the price but it works great! Absolutely no issue installing. I did get a message saying it couldn't guarantee the quality of my print but it looks just fine.
A
Product was great! Worked right out of the box! Have had trouble with installing inks on my HP printer, but this worked great! No issues! Will def buy again
A
HP Magenta and Yellow Ink Cartridges. This product is super good. It's very good quality because it lasts a long time.
Shipping was fast and the product was very affordable.
A
Will order again. Easier to order on line than to find at an office supply store. It is not cheaper just easier and saves me time driving to town. I live in the country which is 30 minutes away from the nearest store that sells ink cartridges. I do not go to town daily or even every week, so ordering is easier.
A
This is excellent ink. Value for the money is top notch. I bought this ink opened up and looked brand new. Placed the ink cartridges in the printer and no issues. The printer calibrated the ink and printed a few test pages with full color. It looked great. Then printed out one with color and black and white images for a coloring page for my son and it looks fantastic. Will definitely purchase again!
D
I am impressed with sensitivity and performance of the dp 666 radio.
A
Very fast, well priced, and quick to get back to me with any questions I had. Definitely recommend the seller.
A
Item as described and posted and delivered quickly. Great seller to deal with!
A
Item as described and works great. Thanks!
A
Great packaging, Great communication Prompt replies Genuine & Great Seller Highly recommended A++++++++++++ Great to deal with Will be doing future buisness in the near future .. Thank you kindly
