Seat Suspension Kit for Zero Turn Lawn Mower Skid Steer Forklift Tractor Seat
Feature:
This suspension is designed to fit between your seat and the seat sliding rails. To ensure this unit will fit your vehicle, measure the bolt pattern connecting the seat to the sliding rails.
Not Compatible with the John Deere Z Trak 200, 300, 400, 500, & 600 series mowers or Toro Timecutter residential mowers.
Vehicle must have sliding tracks for suspension to work properly.
This suspension mounts between the mowers seat and sliding tracks. If your mower doesn't have sliding tracks you will need to incorporate 3/4" spacers. This will give the suspension the necessary clearance to function.
Works with many non-suspension seats; great for commercial turf and rough terrain forklifts, skid-steers, compact rollers and small tractors.
Will This Fit My Mower?
Measure the bolt pattern on the bottom of your seat (The bolts attaching the sliding tracks to the seat). This measurement needs to be 11.5 inches front to rear and 10.69" to 11.25" or 9.50" side to side for the suspension kit to work. (You can drill into the suspension if needed)
The suspension kit mounts between the seat and the sliding tracks. If your mower does not have sliding tracks, you will need to incorporate 1/2"–3/4" spacers and possibly longer bolts for the suspension to function.
You will need to check your seat safety switch. If your switch protrudes beneath the bottom of the seat, you will need to use spacers between the seat and the suspension kit. On some model mowers, you may have to extend the safety switch wire to accommodate the added height of the suspension.
Package Includes:
8 — 1" × 5/16 bolts
4 — Washers
8 — Locking nuts
Please Note: It is the buyer's responsibility to ensure that this unit will fit their application. Please check the Technical Drawings in the photo section to view the bolt mounting patterns.
Shipping Information:
Free Quick Shipping to USA.
Estimated Time of Arrival: within 3–8 working days.
Warranty:
1. Customers have the right to request a return within 60 days from the date of product receipt.
2. At Itopteng, we offer prompt customer service to assist with product usage inquiries and facilitate returns or refunds.
Seat Suspension Kit for Zero Turn Lawn Mower Skid Steer Forklift Tractor Seat
Feature:
This suspension is designed to fit between your seat and the seat sliding rails. To ensure this unit will fit your vehicle, measure the bolt pattern connecting the seat to the sliding rails.
Not Compatible with the John Deere Z Trak 200, 300, 400, 500, & 600 series mowers or Toro Timecutter residential mowers.
Vehicle must have sliding tracks for suspension to work properly.
This suspension mounts between the mowers seat and sliding tracks. If your mower doesn't have sliding tracks you will need to incorporate 3/4" spacers. This will give the suspension the necessary clearance to function.
Works with many non-suspension seats; great for commercial turf and rough terrain forklifts, skid-steers, compact rollers and small tractors.
Will This Fit My Mower?
Measure the bolt pattern on the bottom of your seat (The bolts attaching the sliding tracks to the seat). This measurement needs to be 11.5 inches front to rear and 10.69" to 11.25" or 9.50" side to side for the suspension kit to work. (You can drill into the suspension if needed)
The suspension kit mounts between the seat and the sliding tracks. If your mower does not have sliding tracks, you will need to incorporate 1/2"–3/4" spacers and possibly longer bolts for the suspension to function.
You will need to check your seat safety switch. If your switch protrudes beneath the bottom of the seat, you will need to use spacers between the seat and the suspension kit. On some model mowers, you may have to extend the safety switch wire to accommodate the added height of the suspension.
Package Includes:
8 — 1" × 5/16 bolts
4 — Washers
8 — Locking nuts
Please Note: It is the buyer's responsibility to ensure that this unit will fit their application. Please check the Technical Drawings in the photo section to view the bolt mounting patterns.
Shipping Information:
Free Quick Shipping to USA.
Estimated Time of Arrival: within 3–8 working days.
Warranty:
1. Customers have the right to request a return within 60 days from the date of product receipt.
2. At Itopteng, we offer prompt customer service to assist with product usage inquiries and facilitate returns or refunds.
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
A
I installed this wheel motor on my Exmark Turf Tracer to replace the worn-out original, and it’s been running great. Smooth operation, strong power, and no leaks. Mowing feels steady again, even on slopes. Good quality part and a perfect fit for the 1-603718 replacement.
A
I love this thing. I should have installed it years ago. I installed it on my Husqvarna PZT6126 commercial mower, super easy install. Drill 2 holes and bolt on, easy. Works perfect. Easy to flip up and down, stays where you put it and blocks the grass clippings from blowing all in my planting beds and driveway.
L
I recently purchased the Advanced Chute System for my Husqvarna PZ5430. The unit fit my Zero Turn Mower with only 1 modification. I had to weld in a small piece of metal on the back end of the deck discharge Chute (provided by vendor) to provide a complete seal against the Chute. I have tested it and it works perfectly.
A
I added this 7-gallon secondary fuel tank to my generator setup, and it’s been a game-changer. It provides extra fuel storage, which means I can run my generator for much longer without needing to refuel.
A
The parts in the kit feel solid and durable. After installing everything, my mower's transmission runs smoothly, with no leaks or issues. The quality of the components is top-notch, just like the original parts.
A
The installation was very straightforward. I simply removed the old pulley and swapped it with this new one. No issues with compatibility, and it fit right into place.
A
Even with basic tools, installation was smooth. Everything fit perfectly on my GX160 engine. The flywheel, starter, and fan cover lined up without any issues. Just follow a tutorial if you're unsure.
D
Clearly well-made and tested for accuracy—ignition is strong and consistent every time.
D
If your John Deere is shaking or making noise, this is an affordable and reliable fix.
D
After installation, my mower ran smoothly again with strong, consistent drive power. No more jerking or loss of speed.
A
Hydraulics are tight and leak-free. I’ve put several hours on it already and it’s performing flawlessly.
A
its perfectly on my John Deere and gives excellent traction. Easy to apply and very durable.
A
Easy to install, solid build, and starts my equipment reliably every time
A
Perfect fit for my Kohler diesel engine. Easy to install, works flawlessly, and feels durable.
A
Great seller. Saved me a lot of time packaging was perfect as described good value for money and postage was spot on
B
Easy to install and worked right away. Good quality and seems durable. Great replacement part at a fair price — very satisfied!
B
Super easy to install — literally plug and play. It lifted the deck smoothly and feels very solid. Great quality and fast shipping.
A
Bought this wheel motor for my Toro and it works great! Feels solid and well-made, and installation was pretty straightforward. It runs smooth and performs just like the original. Definitely happy with the quality—good buy for the price!
A
As advertised. New and in appropriate packaging. Shipped promptly. acceptable price.
B
The capacity is perfect for my 2-acre yard. I make fewer stops to empty, which makes the mowing process much more efficient. A great productivity booster.
B
While priced higher than generic bags, the durability and perfect fit justify the cost. I won't be replacing this bag anytime soon, making it cheaper in the long run.
B
The fabric is thicker and more tear-resistant than I expected. It has survived accidental contact with fences and posts without any punctures. Built to withstand real-world use.
B
As a genuine John Deere part, it attaches seamlessly to the mower. All the hooks and brackets align perfectly, and it looks like it belongs there. Maintains the machine's original integrity.
B
The shape of this bag is well thought-out. Clippings slide out completely without sticking or needing to bang the sides. This feature saves time and frustration after each mow.
B
Every component in the kit aligned perfectly with the engine. The elbows snapped securely into place, and the gasket sealed on the first try. No leaks after multiple uses.
